Yokogawa Enhances Power Monitor Product Line

August 4, 2004 -- The CW240 is designed to analyze electric power consumption and power quality in commercial buildings, industrial plants and other large facilities. It has a voltage range of 150/300/600/1000Volts with optional current clamps that can measure from a minimum of 200.0mA up to 3000 Amperes. Wiring inputs are selectable from 1p2w to 3p4w. In addition, Scott connections and simultaneous multiple system load measurements are available in this versatile power meter.

Salient features of the CW240 are highlighted below:

·Electric energy measurement: Integrated values of active, regenerative, reactive power quantities (leading/lagging).
·Instantaneous measurements: Volts, Amps ( per phase & average), Watts, Vars, VA, PF, PA, Hz.
·Demand measurement: Maximum power and time it occurs.
·Waveform measurement: Voltage and current.
·Voltage fluctuation measurement: Dips/swells/ instantaneous power failures.
·Harmonic measurement: Displays each order from the 1st to the 50th harmonic.
·Leakage current measurement with optional 2 Amp clamp-on CTs.
·Internal memory 1MB with optional flash memory cards up to 512MB.
·Displays wiring errors and all settings.
·Four channel analog output and two channel analog input options.
·RS232 communications and ToolBox240 software included.
·Powered up by 6 AA batteries or AC adaptor with optional NiMH battery.



This article courtesy of http://www.powergenerator-guide.info.
You may freely reprint this article on your website or in
your newsletter provided this courtesy notice and the author
name and URL remain intact.

Submit Your Article